| Digital Wireless System | | Integrated Conference System | | Wired Microphone | | Audio Assistance |
| - Kits | | - XDC236 Series | | - Products | | - Products |
| - Components | | | | | | |
| Analog Wireless System | | Wireless Conference System | | Antenna | | Acessories |
| - Kits | | - WDC210 Series | | - Products | | - Components |
| - Components | | | | | | |
| | | Digital Wired Conference System | | | | |
| | | - DC190 Series | | | |
2 channals handhold wireless system kit, with true diversity receiver, base on with Digital UHF Wireless Technology.
| Digital UHF Wireless System | |
DWM223G-ST-2 Digital Wireless Mic. Kit -2 Channels Handhold [Stage Class Receiver] |
Characteristic
▪ Digital audio system. Anti -interference, anti -string disturbances, high -fidelity, high signal -to -noise ratio, and wireless transmission distance. ▪ The performance of multi-channels working is excellent. Digital UHF technology, effective wireless transmission distance can reach 80 meters, effectively avoid interference interference. ▪ 500Mhz and 600Mhz frequency bands. ▪ Use the "Hybrid Power Supply" patent technology to use a 3.7V 14500 lithium battery or 1.5V AAA battery. ▪ A variety of receivers can be matched, including single -channel receiving machines, two -channel receiver, four -channel receiver. ▪ Wireless 20 ~ 20kHz full audio band, frequency response deviation <2DB, close to non -destructive transmission, phase deviations are -30 ° ~ + 60 °. |
Application Scenarios
1. Small performance. 2. High-end meeting scenarios. |
Characteristics
▪ Based on "DT220 TECH" digital U-segment wireless audio technology, it features stage studio-level sound quality, anti-interference, anti-crosstalk, high fidelity, high signal-to-noise ratio, low noise floor, and excellent wireless transmission distance. ▪ Digital U-segment technology, the effective wireless transmission distance is up to 70 meters, effectively avoiding intermodulation interference. ▪ Ultra-low power consumption, battery life >7 hours (lithium battery), standby time >20 hours. ▪ Using "hybrid power" patented technology, it can be powered by 3.7V 14500 lithium battery or 1.5V AAA AA battery. ▪ Used with a receiver with built-in lithium battery, it can be easily used outdoors. |
Parameters
| Communication parameters | ||
Transmission band | 510~590MHz, 668~698MHz (varies according to different regions) | |
Modulation | Pi/4 DQPSK | |
Transmission distance | >120m MAX (related to transmitter model, RF signal absorption, reflection, interference and performance options) | |
Occupied bandwidth | <200KHz (parameter configuration varies according to different regions) | |
Frequency response | 20Hz-20KHz | |
Transmission delay | <4ms | |
| Signal-to-noise ratio | 103dB (different depending on the transmitter) | |
| Distortion T.H.D | <0.03% (@1KHz)(different according to different transmitters) | |
| Phase representation | +30° ~ -60° | |
Launch connector | Direct plug-in XLR male socket | |
Function | Battery, built-in antenna | |
| Microphone index | ||
| Type | Dynamic microphone | |
| Sensitivity | 0^0 - 71dB±3dB ( 0dB=1V/ubar @ 1KHz) | |
| Frequency response range | 50Hz~16kHz | |
| Output impedance | 600Ω ± 30% (@1KHz) | |
| Directivity | Single direction | |
| Physical and electrical indicators | ||
| Power Supply | 14500 lithium battery (3.7V) *2 or AA size 5 battery (1.5V) *2 [Hybrid power technology] | |
| Battery life | >6h (lithium battery) / 4h (AA battery) | |
| Size | L=245mm;R=38mm | |
| Weight | 150g(without battery) |
Common Problems
1. When using a rechargeable lithium battery with poor performance, its voltage reduction circuit will interfere with the performance of the receiver. 2. When multiple sets of equipment are used at the same time, if the frequency point is set improperly, it is easy to cause performance degradation due to intermodulation interference. |
Notes
|
Documents
1_Manual_EN_iweex(DWM223)Digital Audio UHF Wireless System_Handhold Mic.(freq. Group)-2024.07.14 |

Standard Accessories:
=========================
Handhold Microphone *2
2 Channels Receiver [stage class] *1
Antenna *4 (base on frequency band)
AA Battery *4
220V/12V & 1A Power Supply *1
Storage package *1
Manual *1
Qualification certificate *1
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|